Système de coffrage de dalle - Trépieds
Une gamme complète d’échafaudages modulaires, de systèmes de coffrage et de raccords, conçus pour la sécurité, la résistance et une installation rapide.
Haute résistance
Testé et certifié
Montage facile
Rapide et sûr
Résistant à la corrosion
Galvanisé à chaud
Normes internationales
EN 12810 | EN 12811
Affichage de 1–7 sur 7 produits
Tripod - Fixed Type
KIT-FT
Diamètre
Ø57 mm
Tripod - Heavy Duty
KIT-RT-HD
Diamètre
Ø48 mm
Tripod - Medium Duty
KIT_RT_MD
Diamètre
Ø48 mm
Tripod - ø25 Light Duty
KIT-RT-ø25LD
Diamètre
Ø25 mm
Tripod - ø27Light Duty
KIT-RT-ø27LD
Diamètre
Ø27 mm
Tripod - Square Tube Medium Duty
KIT-ST-MD
Diamètre
Ø48 mm
Tripod - Universal Model
KIT-UM
Diamètre
Ø48 mm
Système de coffrage de dalle - Trépieds
A tripod holds a prop upright and stable while it is being positioned and before the formwork above it is complete. Without one, a free standing prop has to be held by hand, which is slow and is the point at which most slab formwork accidents happen. KEAA International manufactures seven tripod patterns in Ludhiana, India, hot dip galvanized to DIN EN 1461, covering fixed type, universal model, and light, medium and heavy duty versions, including a square tube medium duty pattern and light duty tripods for 25 mm and 27 mm props. The range is deliberately graded by duty, because a tripod that is heavier than the job needs is simply extra weight to carry up a building.
What the range includes
Fixed type tripods and a universal model. Heavy duty and medium duty tripods, including a square tube medium duty pattern. Light duty tripods sized for 25 mm and 27 mm props.
Standards and finish
Hot dip galvanized to DIN EN 1461, recorded against products in this range and applied in our own galvanizing plants. Welding is carried out by welders certified to EN 1090-2 and EN 3834-2, accredited by SLV Germany.
Where it is used
Slab formwork erection on concrete frames, wherever props are stood before the beams and decking tie them together. Buyers are formwork specialists, concrete frame contractors, rental fleets and distributors.
Why buy it from the manufacturer
A tripod grips a specific prop diameter, so matching it to the props it will be used with is the whole point. We make both, which means the fit is specified rather than discovered. Management systems are certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 by TÜV Rheinland.
- ISO 9001:2015
- Manufacturing since 2003
- Exported to 42+ countries
Need a quotation for this range?
Send the sizes, finish and quantities you need. We manufacture in our own plants in Ludhiana, India and export to more than 42 countries, so quotations are for container volumes as readily as for single lines.
Request a QuoteCommon questions
It depends on the prop diameter and the duty. Light duty tripods are catalogued for 25 mm and 27 mm props, with medium and heavy duty versions above them. Send the prop size and we will quote the matching tripod.
It takes a wider range of prop sizes than the dedicated patterns, which suits a fleet holding mixed prop stock rather than one standard size.
No. A tripod stabilises a prop while it is positioned and before the formwork ties it in. The prop carries the load.
Besoin d’aide pour choisirle bon produit ?
Nos experts sont là pour vous aider à trouver la meilleure solution pour votre projet.
- Réponse rapide
- Support expert
- Meilleures solutions
ou appelez-nous : +91 98767 01926