Scaffold Tube Fitting-European
A complete range of modular scaffolding, formwork systems and fittings, engineered for safety, strength and fast installation.
High Strength
Tested & Certified
Easy Assembly
Quick & Secure
Corrosion Resistant
Hot Dip Galvanized
Global Standards
EN 12810 | EN 12811
Showing 1–18 of 18 products
Coupler with Welded Strip
KICWS
German Right Angle Coupler
KIRAC(Ü)
German Swivel Coupler
KISWC(Ü)
Girder Coupler
KIGC-E
Half Coupler
KIHC
Half Coupler Assembled
KIHCA
Half Coupler Unassembled
KIHCU
Half Coupler with Brace Lock
KIHCBL
Half Coupler with L Strip Long -Short
KIHCLS/SS
Half Coupler with Welded L Rod
KIHCWLR
Half Coupler with Welded Rod
KIHCWR
Half Coupler with Welded Tube
KIHCWT
Half Coupler with Welded V-Strip
KIHCVS
Pin For Sleeve Coupler
KIPSC
Right Angle Coupler
KIRAC-G
Rosette Coupler
KIRC
Sleeve Coupler-Forged
KISC-F
Swivel Coupler
KISWC-G
Scaffold Tube Fitting-European
A coupler is the smallest component in a scaffold and the one that decides whether it stands. It has to grip a tube hard enough to develop the designed slip resistance, hold that grip through repeated assembly, and do it after years outdoors. EN 74-1 is the European specification that governs exactly this, and it is cited against 17 of the 18 European pattern fittings KEAA International manufactures. The range covers right angle and swivel couplers in the German pattern, girder couplers for fixing to steelwork, and an unusually wide set of half couplers: assembled and unassembled, with brace lock, with welded rod, L rod, tube, V-strip, welded strip and L strip in long and short. Manufacturing, including hot dip galvanizing to DIN EN 1461, is in our own plants in Ludhiana, India.
What the range includes
German right angle couplers and German swivel couplers. Girder couplers for connecting scaffold to structural steelwork. Half couplers in assembled and unassembled form, and with brace lock, welded rod, welded L rod, welded tube, welded V-strip, welded strip, and L strip in long and short versions. Couplers with welded strip complete the range.
Standards and finish
EN 74-1, the European specification for couplers, spigot pins and baseplates for use in falsework and scaffolds, is recorded against the products in this range. Corrosion protection is hot dip galvanizing to DIN EN 1461, applied in our own plants. Props and couplers manufactured by KEAA carry Ü-mark conformity assessed by Sigma Karlsruhe, and welding is certified to EN 1090-2 and EN 3834-2 by SLV Germany.
Where it is used
Tube and fitting scaffolds, tying system scaffolds back to structure, connecting scaffold to steelwork, and every non standard connection a system scaffold cannot make on its own. Buyers are scaffolding contractors, rental fleets and distributors across Europe and export markets following European practice.
Why buy it from the manufacturer
Coupler performance is set by forging or casting quality and by the thread, neither of which is visible on inspection. Ü-mark conformity assessment by Sigma Karlsruhe and welding certification through SLV Germany are the external checks on that, and both apply to production in our own plants. Management systems are certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 by TÜV Rheinland.
- ISO 9001:2015
- Manufacturing since 2003
- Exported to 42+ countries
Need a quotation for this range?
Send the sizes, finish and quantities you need. We manufacture in our own plants in Ludhiana, India and export to more than 42 countries, so quotations are for container volumes as readily as for single lines.
Request a QuoteCommon questions
EN 74-1 is the European specification for couplers, spigot pins and baseplates used in falsework and scaffolds. It sets the performance requirements a coupler has to meet, including slip and the loads it must carry. It is cited against the products in this range.
Because a half coupler is the adapter between a scaffold tube and something else: a brace, a rod, a tube, a strip, a lock. Each welded attachment suits a different connection, which is why the range covers welded rod, L rod, tube, V-strip and strip versions rather than one generic part.
A right angle coupler fixes two tubes at 90 degrees and is load bearing. A swivel coupler allows any angle and is used for bracing. Both are made in the German pattern in this range.
Need Help Choosingthe Right Product?
Our experts are here to help you find the best solution for your project.
- Quick Response
- Expert Support
- Best Solutions
or Call Us: +91 98767 01926