Verstellbare Pfostenträger
Tragende Holzverbinder, Pfostenträger und Bodenanker für Terrassen, Pergolen, Zäune und Holzkonstruktionen, präzise geformt und korrosionsgeschützt.
Traglastgeprüft
Konstruktionsqualität
Korrosionsbeständig
Feuerverzinkt
Passgenau
CNC-geformt
Vielseitig
Innen & Außen
Angezeigt: 1–14 von 14 Produkten
Pfostenträger
PS-01
Verstellbare Pfostenträger
APS-04
Verstellbare Pfostenträger
APS-03
Verstellbare Pfostenträger I-Form
AITPSH
Verstellbare Pfostenträger L-Form
ALTPS-01
Verstellbare Pfostenträger mit Gewinde
ATPSH
Verstellbare Pfostenträger Y-Form
AYTPS-2
Verstellbare Pfostenträger Y-Form
AYTPSHW
Verstellbare Pfostenträger Y-Form
AYTPS
Verstellbare Pfostenträger Y-Form mit Langmutter und Bodenplatte
AYTPSWLNBP
Verstellbarer Pfostenträger mit Langmutter
APSWLN
Verstellbarer Pfostenträger T-Form
ATTPS-02
Verstellbarer Pfostenträger T-Form mit Bodenplatte
ATTPSWBP
Verstellbarer Pfostenträger Y-Form mit Langmutter
AYTPS
Verstellbare Pfostenträger
Ground is never as level as a drawing assumes. An adjustable post support solves that after the fact: a threaded section lets the post height be corrected once the support is already set, so a run of posts can be brought to a level line without digging anything out and starting again. KEAA International manufactures 14 patterns from structural steel to EN 10025-2, covering I, L, T and Y types, threaded supports, long nut versions where more adjustment is needed, and base plate versions where the load has to be spread over a larger area. The range is made in our own plants in Ludhiana, India, and shares its tolerances with the fixed post support range, so the two can be mixed across a single project.
What the range includes
Adjustable I, L, T and Y type post supports, adjustable threaded post supports, long nut versions of the T and Y types for greater adjustment, a T type with base plate, and a Y type with both long nut and base plate. A plain adjustable post support completes the range.
Standards and finish
Manufactured from S235JR structural steel to DIN EN 10025-2. Finish is hot dip galvanized to DIN EN 1461 or electro-galvanized, depending on the model, so confirm which you need when you enquire. Welding is carried out by welders certified to EN 1090-2 and EN 3834-2, accredited by SLV Germany.
Where it is used
Decking and pergola substructures on sloping or uneven ground, fence runs that have to hold a level top line, carports and garden buildings. Buyers are builders merchants, landscaping contractors, timber distributors and DIY retail.
Why buy it from the manufacturer
The adjustable and fixed ranges are made in the same plant to the same tolerances, so a project can use adjustable supports where the ground demands it and fixed supports elsewhere without the post fit changing. Quality management is certified to ISO 9001:2015 by TÜV Rheinland.
- ISO 9001:2015
- Manufacturing since 2003
- Exported to 42+ countries
Need a quotation for this range?
Send the sizes, finish and quantities you need. We manufacture in our own plants in Ludhiana, India and export to more than 42 countries, so quotations are for container volumes as readily as for single lines.
Request a QuoteCommon questions
More than the standard threaded versions, which is what they exist for. The exact range depends on the pattern and size, so send the height correction you need with your enquiry and we will quote the version that covers it.
When the support is fixed to an existing surface or when the load needs spreading over a wider area rather than concentrated at a point. The T type with base plate and the Y type with long nut and base plate cover both cases.
Yes. Both ranges are made in the same plant to the same tolerances, so post fit is consistent across a project that mixes them.
Brauchen Sie Hilfe bei der Wahldes richtigen Produkts?
Unsere Experten helfen Ihnen, die beste Lösung für Ihr Projekt zu finden.
- Schnelle Antwort
- Kompetente Beratung
- Beste Lösungen
oder rufen Sie uns an: +91 98767 01926