Schalungszubehör
Ein komplettes Sortiment an Modulgerüsten, Schalungssystemen und Kupplungen, entwickelt für Sicherheit, Tragfähigkeit und schnelle Montage.
Hohe Tragfähigkeit
Geprüft & zertifiziert
Einfache Montage
Schnell & sicher
Korrosionsbeständig
Feuerverzinkt
Globale Standards
EN 12810 | EN 12811
Angezeigt: 1–20 von 20 Produkten
Ankermutter 100 mm, geschmiedet
KI-AN-F
Durchmesser
Ø15 mm
Ankerstab
KI-TR
Durchmesser
Ø15 mm
Dreiflügel-Ankermutter 70 mm, gegossen
KI-3WAN70-C
Durchmesser
Ø15 mm
Dreiflügel-Ankermutter, gegossen
KI-3WAN100-C
Durchmesser
Ø15 mm
Dreiflügel-Ankermutter, geschmiedet
KI-3WAN100-F
Durchmesser
Ø15 mm
Dreiflügelmutter, geschmiedet
KI-3WN-F
Durchmesser
Ø15 mm
Flügelmutter, geschmiedet
KI-WN-F
Durchmesser
Ø15 mm
Gelenk-Flügelmutter mit Kombiplatte 100 mm, gegossen
KI-SWNRCP-C
Durchmesser
Ø15 mm
Gelenk-Flügelmutter mit Kombiplatte, gegossen
KI-SWNCP-C
Durchmesser
Ø15 mm
Gelenk-Flügelmutter mit Kombiplatte, geschmiedet
KI-SWNCP-F
Durchmesser
Ø15 mm
Gurtplatte
KI-WP
Keilklemme, gegossen
KI-WC
Schalungs-Keilschloss 01
KIFA-FPWC-01
Schalungs-Keilschloss 02
KIFA-FPWC-02
Sechskantmutter oder Mutter mit Sicherungsstift
KI-HN/WLP
Durchmesser
Ø15 mm
Tekko-Clip, geschmiedet
KI-TCF
Verbindungsbolzen 16 mm mit Federsplint
KI-CPRC
Wasserbarriere mit Scheibe
KI-WB
Durchmesser
Ø15 mm
Zweiflügel-Ankermutter 100 mm, gegossen
KI-2WAN100-C
Durchmesser
Ø15 mm
Zweiflügelmutter, geschmiedet
KI-2WN-F
Durchmesser
Ø15 mm
Schalungszubehör
Formwork accessories are the small forged and cast components that hold a wall form together against the pressure of wet concrete, which is considerable and acts outwards on every square metre of the form face. KEAA International manufactures 20 items in this range in Ludhiana, India, covering three wing anchor nuts in cast and forged versions and in 70 mm and 100 mm sizes, swivel wing nuts with combination plates, anchor nuts, hexagonal nuts and nuts with locking pin, Tekko clips, formwork panel wedge clamps in two patterns, and connecting pins with R-clips. The DIN EN 50961 specification is recorded against products in this range. The split between cast and forged versions runs through the whole range, because the two behave differently under load and buyers specify one or the other.
What the range includes
Three wing anchor nuts, cast and forged, in 70 mm and 100 mm. Three wing nuts forged. Anchor nuts 100 mm forged. Swivel wing nuts with combination plate, cast and forged, including a 100 mm cast version. Hexagonal nuts and nuts with locking pin. Tekko clips forged. Formwork panel wedge clamps in two patterns. Connecting pins 16 mm with R-clip.
Standards and finish
DIN EN 50961 is recorded against products in this range. Manufacturing including forging, casting and welding is in house, with welding carried out by welders certified to EN 1090-2 and EN 3834-2, accredited by SLV Germany. Management systems are certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 by TÜV Rheinland.
Where it is used
Wall and column formwork on concrete frames, tying form faces together against concrete pressure, and connecting panels and walings. Buyers are formwork specialists, concrete frame contractors, rental fleets and distributors.
Why buy it from the manufacturer
These are the components that fail first if the forging or casting is poor, and the failure mode is a form blowing out under pressure. Making them in house, with certified welding and an audited quality system, is the only way to hold that consistently across a container load.
- ISO 9001:2015
- Manufacturing since 2003
- Exported to 42+ countries
Need a quotation for this range?
Send the sizes, finish and quantities you need. We manufacture in our own plants in Ludhiana, India and export to more than 42 countries, so quotations are for container volumes as readily as for single lines.
Request a QuoteCommon questions
Forging produces a denser grain structure and is generally specified for the more demanding duty; casting suits items where the geometry is complex. Both are made here across the wing nut, anchor nut and Tekko clip ranges, so the choice can follow your specification.
It tightens onto the tie rod that holds two form faces together against concrete pressure. The three wings let it be turned by hand or with a bar on site. It is catalogued in 70 mm and 100 mm.
16 mm with R-clip is catalogued. Send the application with your enquiry if you need a different size and we will quote against it.
Brauchen Sie Hilfe bei der Wahldes richtigen Produkts?
Unsere Experten helfen Ihnen, die beste Lösung für Ihr Projekt zu finden.
- Schnelle Antwort
- Kompetente Beratung
- Beste Lösungen
oder rufen Sie uns an: +91 98767 01926