Systeemvloerbekisting-Driepoten
Een compleet assortiment modulaire steigers, bekistingssystemen en koppelingen, ontworpen voor veiligheid, sterkte en snelle montage.
Hoge sterkte
Getest & gecertificeerd
Eenvoudige montage
Snel & veilig
Corrosiebestendig
Thermisch verzinkt
Wereldwijde normen
EN 12810 | EN 12811
Toont 1–7 van 7 producten
Driepoot ø25, lichte uitvoering
KIT-RT-ø25LD
Diameter
Ø25 mm
Driepoot ø27, lichte uitvoering
KIT-RT-ø27LD
Diameter
Ø27 mm
Driepoot vierkante buis, middelzware uitvoering
KIT-ST-MD
Diameter
Ø48 mm
Driepoot, middelzware uitvoering
KIT_RT_MD
Diameter
Ø48 mm
Driepoot, universeel model
KIT-UM
Diameter
Ø48 mm
Driepoot, vast type
KIT-FT
Diameter
Ø57 mm
Driepoot, zware uitvoering
KIT-RT-HD
Diameter
Ø48 mm
Systeemvloerbekisting-Driepoten
A tripod holds a prop upright and stable while it is being positioned and before the formwork above it is complete. Without one, a free standing prop has to be held by hand, which is slow and is the point at which most slab formwork accidents happen. KEAA International manufactures seven tripod patterns in Ludhiana, India, hot dip galvanized to DIN EN 1461, covering fixed type, universal model, and light, medium and heavy duty versions, including a square tube medium duty pattern and light duty tripods for 25 mm and 27 mm props. The range is deliberately graded by duty, because a tripod that is heavier than the job needs is simply extra weight to carry up a building.
What the range includes
Fixed type tripods and a universal model. Heavy duty and medium duty tripods, including a square tube medium duty pattern. Light duty tripods sized for 25 mm and 27 mm props.
Standards and finish
Hot dip galvanized to DIN EN 1461, recorded against products in this range and applied in our own galvanizing plants. Welding is carried out by welders certified to EN 1090-2 and EN 3834-2, accredited by SLV Germany.
Where it is used
Slab formwork erection on concrete frames, wherever props are stood before the beams and decking tie them together. Buyers are formwork specialists, concrete frame contractors, rental fleets and distributors.
Why buy it from the manufacturer
A tripod grips a specific prop diameter, so matching it to the props it will be used with is the whole point. We make both, which means the fit is specified rather than discovered. Management systems are certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 by TÜV Rheinland.
- ISO 9001:2015
- Manufacturing since 2003
- Exported to 42+ countries
Need a quotation for this range?
Send the sizes, finish and quantities you need. We manufacture in our own plants in Ludhiana, India and export to more than 42 countries, so quotations are for container volumes as readily as for single lines.
Request a QuoteCommon questions
It depends on the prop diameter and the duty. Light duty tripods are catalogued for 25 mm and 27 mm props, with medium and heavy duty versions above them. Send the prop size and we will quote the matching tripod.
It takes a wider range of prop sizes than the dedicated patterns, which suits a fleet holding mixed prop stock rather than one standard size.
No. A tripod stabilises a prop while it is positioned and before the formwork ties it in. The prop carries the load.
Hulp nodig bij het kiezen vanhet juiste product?
Onze experts helpen u graag de beste oplossing voor uw project te vinden.
- Snelle reactie
- Deskundige support
- Beste oplossingen
of bel ons: +91 98767 01926